100% fluor – free FIS and IBU approved.
High performance powder accelerator, maximum accelerator and long-lasting performance.

Maplus Fluor free powder boost for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -22°C to -8°C. Performancing use with air humidity between 50% and 80%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel

Available packaging

• Cod. MFF0140 - 25 gr

All type of snow

snow temperature:  -22° / -8°C

 humidity: 50 / 80%

 iron temperature: 160°C

HOW TO USEHOT APPLICATION WITH WAXING IRON

1. 1. Spread powder wax evenly on the ski base;
2. 2. Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);
3. 3. Wait at least few minutes for the ski wax to harden and the ski base to cool down;
4. 4. If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;
5. 5. Free the ski base structure with manual soft brass brush;
6. 6. Brush the ski base with manual or roto hard horsehair brush;
7. 7. Brush the ski base with manual or roto soft nylon brush;
8. 8. Polish the ski base with 12 mm merino wool roller.

GM BOOST Powder are recommended to be overlapped on GM BASE Solid or Gel

FURLO SPORT SUGGESTION:

Choose Maplus Ski Powder and leave the competition behind – no compromises on speed, this time the milliseconds are on your side!