100% fluor – free FIS and IBU approved.
High performance powder accelerator, maximum accelerator and long-lasting performance.

Fluor free powder boost for racing. Use for moist, polished and/or icy compact and mixed artificial snow with snow temperature from -3°C to 0°C. Performancing use with air humidity between 60% and 100%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel.

Available packaging

• Cod. MFF0142 - 25 gr

Moist, polished and/or icy compact and mixed artificial snow 
snow temperature: -3° / 0°C
humidity: 60 / 100%
iron temperature: 160°C

HOW TO USE HOT APPLICATION WITH WAXING IRON

1. Spread powder wax evenly on the ski base;
2. Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);
3. Wait at least few minutes for the ski wax to harden and the ski base to cool down;
4. If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;
5. Free the ski base structure with manual soft brass brush;
6. Brush the ski base with manual or roto hard horsehair brush;
7. Brush the ski base with manual or roto soft nylon brush;
8. Polish the ski base with 12 mm merino wool roller.

GM BOOST Powder are recommended to be overlapped on GM BASE Solid or Gel.

FURLO SPORT SUGGESTION
Choose Maplus Ski Powder and leave the competition behind – no compromises on speed, this time the milliseconds are on your side!