Solid paraffin for training use and leisure. Use for all type of snow, not wet, with temperature from -9°C to -3°C. It’s an excellent product for the protection of ski bases and it can be used as universal racing and training base. Performancing use with air humidity < 50%. Use hot application with the waxing iron at 130°/140°C.

Available packaging

• Cod. MW0301 - 100gr
• Cod. MW0311 - 250gr
• Cod. MW0321 - 1kg

All type of snow

snow temperature: –9°/–3°C

humidity: < 50%

iron temperature: 130°/140°C

APPLICATIONS PROCEDURE GENERAL FEATURES

The race waxing can be carried out hot or cold, depending on the physical condition of products and the experience of the skiman.

HOT APPLICATION PROCEDURE WITH WAXING IRON

1. Let the paraffin block drop on all the ski base by putting it in contact with the waxing iron base at a temperature of 130°C.;
2. Melt immediately the wax by spreading it forward and backward with the waxing iron, then carry out a final passage from the tip to the tail (nearly 4 cm. per second);
3. Wait at least 15 minutes for the ski wax to harden and the ski base to cool down;
4. Remove the was in excess with a sharpen plexy scraper doing little pressure;
5. Free the ski side and edges side from hardened paraffin with the plexy scraper;
6. Brush the ski base with a hard nylon manual brush;
7. Brush the ski base with a manual or roto hard horsehair brush;
8. Polish the ski base with a manual or roto soft nylon brush.