Solid base paraffin for any type of snow with temperature from -5°C to 0°C. It’s an excellent product for the saturation and the protection of racing ski bases and it can be used as universal training and testing base. It has a melting point of 60°C so it’s the best product for the hot saturation of polyethylene ski bases with the thermo-box or the thermo-cover. Use hot application with the waxing iron at 120°/130°C.

Available packaging

• Cod. MW0871 - 250gr
• Cod. MW0876 - 1kg

All type of snow
snow temperature: –5°/0°C
iron temperature: 120/130°C

HOT APPLICATION PROCEDURE WITH WAXING IRON

1. Let the paraffin block drop on all the ski base by putting it in contact with the waxing iron base at a temperature of 130°C.;
2. Melt immediately the wax by spreading it forward and backward with the waxing iron, then carry out a final passage from the tip to the tail (nearly 4 cm. per second);
3. Wait at least 15 minutes for the ski wax to harden and the ski base to cool down;
4. Remove the was in excess with a sharpen plexy scraper doing little pressure;
5. Free the ski side and edges side from hardened paraffin with the plexy scraper;
6. Brush the ski base with a hard nylon manual brush;
7. Brush the ski base with a manual or roto hard horsehair brush;
8. Polish the ski base with a manual or roto soft nylon brush.