100% fluor – free FIS and IBU approved.
High performance powder accelerator, maximum accelerator and long-lasting performance.

Fluor free powder boost with Molybdenum for racing. Use for all type of snow, new and transformed, artificial and natural, with snow temperature from -9°C to -2°C. Performancing use with air humidity between 50% and 90%. Use hot application with the waxing iron at 160°C. It’s recommended to overlap GM BOOST on GM BASE Solid or Gel.


Available packaging

• Cod. MFF0141M - 25 gr

All type of snow
snow temperature: -9° / -2°C
humidity: 50 / 90%
iron temperature: 160°C


HOW TUO USE HOT APPLICATION WITH WAXING IRON

    Spread powder wax evenly on the ski base;
    Melt the wax passing the waxing iron from the tip to the tail at recommended temperature of 160°C; move the iron at a constant speed (nearly 3 cm per second);
    Wait at least few minutes for the ski wax to harden and the ski base to cool down;
    If necessary, remove the excess of melted wax with a sharpened plexy scraper with gentle pressure;
    Free the ski base structure with manual soft brass brush;
    Brush the ski base with manual or roto hard horsehair brush;
    Brush the ski base with manual or roto soft nylon brush;
    Polish the ski base with 12 mm merino wool roller.

GM BOOST Powder are recommended to be overlapped on GM BASE Solid or Gel.

FURLO SPORT SUGGESTION
Choose Maplus Ski Powder and leave the competition behind – no compromises on speed, this time the milliseconds are on your side!